English
Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
Z900e 3kw 220V 380V AC Variable Frequency Drive VFD Inverter for 3.0kw Spindle 3000W VFD for CNC Driver
Z900E 3KW 220V 380V AC Variable Frequency Drive VFD Inverter for 3.0KW spindle 3000W vfd for cnc driver 1.Product Specif
Description
Basic Info
| Model NO. | Z900E |
| Link of Transformation | AC-DC-AC Variable-Frequency Drive |
| Nature of DC Power | Voltage Variable-Frequency Drive |
| Function | Simple Type |
| Brand | Machtric |
| Item Name | Single Phase Variable Frequency Drive |
| Output Current | 2.4A-300A |
| Digital Setting | 0.01Hz |
| Communication Methods | RS485 |
| Speed Range | 1:100(Sfvc) |
| Input Power 220V | 0.4-3.7kw |
| Input Power 380V | 0.75-315kw |
| Analog Setting | Maximum Frequency X 0.025% |
| Timing Control | Time Range:(0.0-6500.0 Minutes |
| Maximum Frequency | V/F Control(0-3200Hz);Vector Control(0-320Hz) |
| Transport Package | Standard Export Packing |
| Specification | Mini Type |
| Trademark | Machtric |
| Origin | China |
| HS Code | 850440999 |
| Production Capacity | 20000 Pieces/Month |
Product Description
Z900E 3KW 220V 380V AC Variable Frequency Drive VFD Inverter for 3.0KW spindle 3000W vfd for cnc driver1.Product Specification:
| Item | Z900E | |
| tandard Function | Control mode | Sensorless flux vector control(SFVC)Voltage/Frequency(V/F) control |
| Maximum frequency | Vector control:0-320HzV/F control:0-3200Hz | |
| Carrier frequency | 1-16kHzThe carrier frequency is automatically adjusted based on the load features. | |
| Input frequency resolution | Digital setting:0.01HzAnalog setting:maximum frequency x 0.025% | |
| Startup torque | G type:0.5 Hz/150%(SFVC)P type:0.5 Hz/100% | |
| Speed range | 1:100(SFVC) | |
| Speed stability accuracy | ±0.5%(SFVC) | |
| Torque control accuracy | ± 5% (CLVC) | |
| Overload capacity | G type:60s for 150% of the rated current,3s for 180% of the rated current.P type:60s for 120% of the rated current,3s for 150% of the rated current. | |
| Torque boost | Fixed boostCustomized boost 0.1%-30.0% | |
| V/F Curve | Straight-line V/F curveMulti-point V/F curveN-power V/F curve(1.2-power,1.4-power,1.6-power,1.8-power,square | |
| V/F separation | Two types:complete separation;half separation | |
| Ramp mode | Straight-line rampS-curve rampFour groups of acceleration/deceleration time with the range of 0.0-6500.0s | |
| DC braking | DC braking frequency:0.00 Hz to maximum frequencyBraking time:0.0-100.0sBraking action current value:0.0%-100% | |
| JOG control | JOG frequency range:0.00-50.00HzJOG acceleration/deceleration time:0.0-6500.s | |
| Onboard multiple | It implements up to 16 speeds via the simple PLC function or combination of X terminal states | |
| Onboard PID | It realizes process-controlled closed loop control systerm easily | |
| Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the main voltage changes | |
| Overvoltage/Overcurrent stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/over current | |
| Torque limit and control | It can limit the torque automatically and prevent frquent over current tripping during the running process | |
| Instantaneous stop doesn't stop | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time | |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive | |
| High performace | Control of asynchronous motor is implemented throgh the high-performance current vectorControl technology | |
| Timing control | Time range:0.0-6500.0 minutes | |
| Communication methods | RS485 | |
| Running command channel | Given by the panel,control terminals.Serial communication port,can be switched by many ways | |
| Frequency source | 10 kinds of frequency source,given by Digital analog voltage,analog current,Pulse,serial port.can be switched by man ways. | |
| Auxiliary frequency source | 10 kinds of Frequency source,can easily realize Micro ajustment,frequency Synthesizer. | |
| Input and output | Input terminal | 6 digitak input terinals,one of which supports up to100kHz high-speed pulse input.2 analog input terminal,one of which only supports 0-10v voltage input and the other supports 0-10v voltage input or 4-20 mA current input |
| Output termianl | 1 digital output terminal1 relay output terminal1 analog output termianl:that supports 0-20 mA current output or 0-10V voltage ouput | |
| Operation on the operation panel | LED display | It displays the parameters |
| Key locking and cuntion selection | It can lock the keys partially or completely and define the function range of some keys so as to prevent mis-function | |
| Protection mode | Motor short-circuit detection at power-on,output phase loss protection,over-curent protection,over-voltage protection,under voltage protection,overheat protection and overload protection. | |
| Environment | Installation location | Indoor,avoid direct sunlight,dust,corrosive gas,combustible gas,oil smoke,vapour drip or salt |
| Altitude | Lower than 1000m(Lower the grades when using higher then 1000m) | |
| Ambient temperature | -10°C~40°C(Lower the grades if the ambient temperature is between 40°C and 50°C) | |
| Humidity | Less than 95%RH,without condensing | |
| Vibration | Less than 5.9 m/s² (0.6g) | |
| Storage temperature | -20°C~60°C | |
1PHAC220V±15% 50/60Hz
| Model | Rated output power | Rated Output Current | OverloadCapacity | Applicable motor |
| (KW) | (A) | (60s)(A) | (KW) | |
| Z900-2S0.4GE | 0.4 | 5.4 | 3.75 | 0.4 |
| Z900-2S0.75GE | 0.75 | 7.2 | 7.5 | 0.75 |
| Z900-2S1.5GE | 1.5 | 10 | 10.5 | 1.5 |
| Z900-2S3.7GE | 3.7 | 16 | 10.0 | 3.7 |
| Z900-2S5.5GE | 5.5 | 21 | 20 | 5.5 |
| Z900-2S7.5GE | 7.5 | 31 | 30 | 7.5 |
| Model | Rated output power | Rated Output Current | OverloadCapacity | Applicable motor |
| (KW) | (A) | (60s)(A) | (KW) | |
| Z900-4T0.4GE | 0.4 | 3.4 | 1.2 | 0.4 |
| Z900-4T0.75GE | 0.75 | 3.8 | 2.5 | 0.75 |
| Z900-4T1.5GE | 1.5 | 5 | 3.7 | 1.5 |
| Z900-4T2.2GE | 2.2 | 5.8 | 5.0 | 2.2 |
| Z900-4T3.7GE/5.5PE | 3.7/5.5 | 10.0/15.0 | 9.0/13.0 | 3.7/5.5 |
| Z900-4T5.5GE | 5.5 | 15 | 13 | 5.5 |
| Z900-4T7.5GE/11PE | 7.5 | 20 | 17 | 7.5 |
| Z900-4T11GE/15PE | 11/15 | 26/35 | 25/32 | 11/15 |
| Z900-4T15GE/18.5PE | 15/18.5 | 35/38 | 32/37 | 15/18.5 |
| Z900-4T18.5GE/22PE | 18.5/22 | 38/46 | 37/45 | 18..5/22 |
| Z900-4T22GE/30PE | 22/30 | 46/62 | 45/60 | 22/30 |
| Z900-4T30GE/37PE | 30/37 | 62/76 | 60/75 | 30/37 |
| Z900-4T37GE/45PE | 37/45 | 76/90 | 75/90 | 37/45 |
| Z900-4T45GE/55PE | 45/55 | 90/105 | 90/110 | 45/55 |
| Z9010-4T55GE | 55 | 105 | 110 | 55 |
| Z900-4T75PE | 75 | 140 | 150 | 75 |
| Z900-4T75GE/90E | 75/90 | 140/160 | 150/176 | 75/90 |
| Z900-4T90GE/110PE | 90/110 | 160/210 | 176/210 | 90/110 |
| Z900-4T110GE/132PE | 110/132 | 210/240 | 210/253 | 110/132 |
| Z900-4T132GE/160PE | 132/160 | 240/290 | 253/300 | 132/160 |
| Z900-4T160GE/185PE | 160/185 | 290/330 | 300/340 | 160/185 |
Food machinery-Feeder, mixer, bag filling machines, pastry forming machine…Woodworking Machinery-Polishing machine, grinding machine, carving machine…Textile Machinery-winding machine, fabric inspection machine…Packaging Machinery-Liquid filling machine, pharmaceutical filling machine…Other: Stone cutting machine…Blowing machine, Water-pump-housetop/a fan to fill and exhaust gas, small Pump for water supplyPrinting equipment-offset Conveyor belt-Small conveyor belt, common conveyor beltFeeding equipment-Tool machine, winding machines, weaving machines equipmentRubber and plastic industry-Sealing machine, various types of small machineGeneral business-Common household, air conditioning, automatic door
4.Product Show:5.Contact Us:
Our Contact
Send now
